[jira] Created: (WSFCPP-21) The default value for client_repo in echo_security sample should be changed

classic Classic list List threaded Threaded
6 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

[jira] Created: (WSFCPP-21) The default value for client_repo in echo_security sample should be changed

JIRA jira@wso2.org
The default value for client_repo  in echo_security sample should be changed
----------------------------------------------------------------------------

                 Key: WSFCPP-21
                 URL: http://wso2.org/jira/browse/WSFCPP-21
             Project: WSO2 WSF/C++
          Issue Type: Bug
          Components: Samples
    Affects Versions: 1.0.0
         Environment: Windows XP
            Reporter: Dushshantha Chandradasa
         Assigned To: Samisa Abeysinghe


The default location for the client_repo in echo_security sample is ../client_repo. But when we run RAMPART_SAMPLES_DIR\client\sec_echo\deploy_client_repo.bat, it creates the client_repo folder in WSFCPP_HOME. Its better if the sample's default value for client_repo points the default client_repo location which is WSFCPP_HOME\client_repo

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: http://wso2.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira

       

_______________________________________________
Wsf-c-dev mailing list
[hidden email]
http://wso2.org/cgi-bin/mailman/listinfo/wsf-c-dev
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

[jira] Commented: (WSFCPP-21) The default value for client_repo in echo_security sample should be changed

JIRA jira@wso2.org
    [ http://wso2.org/jira/browse/WSFCPP-21?page=comments#action_14862 ]
           
Senaka Fernando commented on WSFCPP-21:
---------------------------------------

I believe there is an issue with relative paths. This was just a dummy value, with no intention of getting it to work. I believe the README.SAMPLES file says that it will not work unless you change the default value. However, I will look into the possibility of having the ability to use a relative path.

Regards,
Senaka

> The default value for client_repo  in echo_security sample should be changed
> ----------------------------------------------------------------------------
>
>                 Key: WSFCPP-21
>                 URL: http://wso2.org/jira/browse/WSFCPP-21
>             Project: WSO2 WSF/C++
>          Issue Type: Bug
>          Components: Samples
>    Affects Versions: 1.0.0
>         Environment: Windows XP
>            Reporter: Dushshantha Chandradasa
>         Assigned To: Samisa Abeysinghe
>
> The default location for the client_repo in echo_security sample is ../client_repo. But when we run RAMPART_SAMPLES_DIR\client\sec_echo\deploy_client_repo.bat, it creates the client_repo folder in WSFCPP_HOME. Its better if the sample's default value for client_repo points the default client_repo location which is WSFCPP_HOME\client_repo

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: http://wso2.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira

       

_______________________________________________
Wsf-c-dev mailing list
[hidden email]
http://wso2.org/cgi-bin/mailman/listinfo/wsf-c-dev
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

[jira] Assigned: (WSFCPP-21) The default value for client_repo in echo_security sample should be changed

JIRA jira@wso2.org
In reply to this post by JIRA jira@wso2.org
     [ http://wso2.org/jira/browse/WSFCPP-21?page=all ]

Senaka Fernando reassigned WSFCPP-21:
-------------------------------------

    Assignee: Senaka Fernando  (was: Samisa Abeysinghe)

> The default value for client_repo  in echo_security sample should be changed
> ----------------------------------------------------------------------------
>
>                 Key: WSFCPP-21
>                 URL: http://wso2.org/jira/browse/WSFCPP-21
>             Project: WSO2 WSF/C++
>          Issue Type: Bug
>          Components: Samples
>    Affects Versions: 1.0.0
>         Environment: Windows XP
>            Reporter: Dushshantha Chandradasa
>         Assigned To: Senaka Fernando
>
> The default location for the client_repo in echo_security sample is ../client_repo. But when we run RAMPART_SAMPLES_DIR\client\sec_echo\deploy_client_repo.bat, it creates the client_repo folder in WSFCPP_HOME. Its better if the sample's default value for client_repo points the default client_repo location which is WSFCPP_HOME\client_repo

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: http://wso2.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira

       

_______________________________________________
Wsf-c-dev mailing list
[hidden email]
http://wso2.org/cgi-bin/mailman/listinfo/wsf-c-dev
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

[jira] Commented: (WSFCPP-21) The default value for client_repo in echo_security sample should be changed

JIRA jira@wso2.org
In reply to this post by JIRA jira@wso2.org
    [ http://wso2.org/jira/browse/WSFCPP-21?page=comments#action_14901 ]
           
Senaka Fernando commented on WSFCPP-21:
---------------------------------------

I have changed the default client_repo name to a more meaningful value of 'client_repo/' instead of '../client_repo/'. However, I'll be looking forward to the possibility of using relative paths.

Regards,
Senaka

> The default value for client_repo  in echo_security sample should be changed
> ----------------------------------------------------------------------------
>
>                 Key: WSFCPP-21
>                 URL: http://wso2.org/jira/browse/WSFCPP-21
>             Project: WSO2 WSF/C++
>          Issue Type: Bug
>          Components: Samples
>    Affects Versions: 1.0.0
>         Environment: Windows XP
>            Reporter: Dushshantha Chandradasa
>         Assigned To: Senaka Fernando
>
> The default location for the client_repo in echo_security sample is ../client_repo. But when we run RAMPART_SAMPLES_DIR\client\sec_echo\deploy_client_repo.bat, it creates the client_repo folder in WSFCPP_HOME. Its better if the sample's default value for client_repo points the default client_repo location which is WSFCPP_HOME\client_repo

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: http://wso2.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira

       

_______________________________________________
Wsf-c-dev mailing list
[hidden email]
http://wso2.org/cgi-bin/mailman/listinfo/wsf-c-dev
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

[jira] Assigned: (WSFCPP-21) The default value for client_repo in echo_security sample should be changed

JIRA jira@wso2.org
In reply to this post by JIRA jira@wso2.org

     [ https://wso2.org/jira/browse/WSFCPP-21?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]

Senaka Fernando reassigned WSFCPP-21:
-------------------------------------

    Assignee: Nandika Jayawardana  (was: Senaka Fernando)

> The default value for client_repo  in echo_security sample should be changed
> ----------------------------------------------------------------------------
>
>                 Key: WSFCPP-21
>                 URL: https://wso2.org/jira/browse/WSFCPP-21
>             Project: WSO2 WSF/C++
>          Issue Type: Bug
>          Components: Samples
>    Affects Versions: 1.0.0
>         Environment: Windows XP
>            Reporter: Dushshantha Chandradasa
>            Assignee: Nandika Jayawardana
>
> The default location for the client_repo in echo_security sample is ../client_repo. But when we run RAMPART_SAMPLES_DIR\client\sec_echo\deploy_client_repo.bat, it creates the client_repo folder in WSFCPP_HOME. Its better if the sample's default value for client_repo points the default client_repo location which is WSFCPP_HOME\client_repo

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: https://wso2.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira

       

_______________________________________________
Wsf-c-dev mailing list
[hidden email]
https://wso2.org/cgi-bin/mailman/listinfo/wsf-c-dev
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

[jira] Resolved: (WSFCPP-21) The default value for client_repo in echo_security sample should be changed

JIRA jira@wso2.org
In reply to this post by JIRA jira@wso2.org

     [ https://wso2.org/jira/browse/WSFCPP-21?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]

Nandika Jayawardana resolved WSFCPP-21.
---------------------------------------

    Fix Version/s: 2.0.0
       Resolution: Fixed

Change the sample and made the default client_repo path to be <WSFCPP_HOME>/client_repo.


> The default value for client_repo  in echo_security sample should be changed
> ----------------------------------------------------------------------------
>
>                 Key: WSFCPP-21
>                 URL: https://wso2.org/jira/browse/WSFCPP-21
>             Project: WSO2 WSF/C++
>          Issue Type: Bug
>          Components: Samples
>    Affects Versions: 1.0.0
>         Environment: Windows XP
>            Reporter: Dushshantha Chandradasa
>            Assignee: Nandika Jayawardana
>             Fix For: 2.0.0
>
>
> The default location for the client_repo in echo_security sample is ../client_repo. But when we run RAMPART_SAMPLES_DIR\client\sec_echo\deploy_client_repo.bat, it creates the client_repo folder in WSFCPP_HOME. Its better if the sample's default value for client_repo points the default client_repo location which is WSFCPP_HOME\client_repo

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: https://wso2.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira

       

_______________________________________________
Wsf-c-dev mailing list
[hidden email]
https://wso2.org/cgi-bin/mailman/listinfo/wsf-c-dev
Loading...